192.168.1.1 wifi
192.168.1.1 Router Configuration Center

192.168.100.1

Router factories use 192.168.100.1 as a class A IP address for the default gateway of their routers. In its local area network, this address must be unique. There cannot be more than one device with the IP address of 192.168.100.1. It can be used for setting up your own network and it is also occasionally utilised as the default local address for some network routers.

192.168.100.1 IP Address

To access the admin panel type 192.168.100.1 in the address bar of your web browser or click on the button below.

How to Access 192.168.100.1

If you'd like to access your router's console, open your browser and type http://192.168.100.1 into your browser's address bar. From here, you'll be able to make all sorts of changes, both basic and more advanced. Because this is a private IPv4 network address, it is possible for any device on the network to use 192.168.100.1. As mentioned above, be careful not to assign more than one device to 192.168.100.1 as this will cause an IP address conflict.

Setting up Your Router Using 192.168.100.1

Setting up your router to use 192.168.100.1 is easy. The most important step is firstly logging into your router's admin panel. Let's follow these steps:

  • Type http://192.168.100.1 into your browser's address bar
  • Enter your username and password when prompted. If you've lost these, check out our handy guide
  • Select the 'network' menu section
  • Enter the username and password from your network provider
  • The DNS is 8.8.8.8 and 8.8.4.4., as provided by Google.

You should also set up your router's wireless function, if applicable, making sure to choose a good encryption method such as WPE or WPA

Potential Issues with 192.168.100.1

You may encounter some issues when using 192.168.100.1, including an unresponsive gateway device or a device address assignment problem. For the latter issue, you have to establish a static IP address for gateways with 192.168.100.1. The gateway device problem is likely down to technical failures. Another issue is incorrect client address assignment. This happens on Wi-Fi networks where network names and IP address settings are given to clients automatically. The automated nature causes these glitches. Although they are rare, they can cause gateway setting corruption.

Router Username and Password List

BrandModelProtocolUsernamePassword
2WIREHOMEPORTAL Rev. SBC YAHOO! DSL(none)2Wire(none)
2WIREALL WIFI ROUTERSHTTP(none)Wireless